Prevention of the catastrophes

The expedient of reception of energy

                                                                                        I devote to memory of N.Tesla

 

What else does the Unified Theory of Nature give? She allows to develop new expedients of reception of energy. Here one of them.

The expedient has no analogues, as it is grounded that in the certain requirements thermal energy of fluid (and of water including) can be selected, passing interdictions of laws of thermodynamics. The requirement of takeoff of thermal energy of water in the new expedient is use the opened by Unified Theory the natural phenomenon «Heat-mechanical shock in a fluid» (Secrets of water and global warming see).

The expedient consists that two parallel plates from an inflexible material place in water. The plates smoothly periodically postpone from each other and approach. By that one extremity of each plate with the same name leads of the second at a motion of the plates on a mutual distance and rapprochement. In the end of the mutual distance of plates the velocity of the distance sharply is increased and then reduce.

The smooth mutual distance of plates with an advancing of one end of plates with the same name allows to inhaust water on the one hand plates in space between plates (1st step - an inhausting). The specified initial parallelism of the plates allows to charge in the best way the space between plates by water - to fill this space with fresh water (not working).

The magnification of velocity of a motion of the plates in the end of their mutual distance calls sharp pressure decrease in water between plates, that leads to the steam bubble cavitation of a fluid [50] (2nd step - cavitation).

The subsequent decrease in the specified velocity of a motion of the plates leads to a collapse of the steam bubbles. According to the «Heat-mechanical shock» the specified collapse leads to mechanical shock on an interior surface of plates. Energy of this shock under the Unified Theory is gained from water thermal energy. As a result of this shock the plates gain the additional mechanical travel (3rd step - a working stroke). This travel can be used for the subsequent transformation to other convenient views of a motion (for example, in the circumrotatory) or in other views of energy (for example, in the electrical).

Analogously to the distance (look above) the smooth mutual approach of plates with the specified advancing of their ends allows to push out water from the space between plates in other side (4th step - an exhaust). By that the initial and terminating parallelism of the plates allows to free the space between plates from waste water in the best way.

Plates - rigid for exclusion of their strains at motions. Such strains would worsen controllability of filling up and space dump between plates. Rigidity of plates is necessary also for the most active bubble cavitation of water ([50] see above). Their rigidity is necessary and in case of achievement of the peak travel of the plates in the course of perception of shock without conversion of energy of shock in an energy of deformation of a material of plates.

The periodicity of movements of the plates is necessary for maintenance of the continuous reception of energy.

In drawing the full tchnological cycle of the featured expedient of reception of energy is figured. 

                                                                     Technological cycle

 

a…g - the intermediate standings of plates in the technological cycle. a - the initial point of plates, at which the plates are mutually parallel and on the minimum distance from each other, expelling their collision.  b - the forward ends of the plates kept away from each other - water was inhausted in the space between the plates. c - the back ends of plates kept away also, the plates are parallel, the additional volume of water has arrived. d - the standing of the plates after sharp magnification of velocity of their mutual distance and its decrease, in water have originated bubble cavities and have begun collapse. i - the standing of the plates after perception them of mechanical shock from water between plates. f - the forward ends of the plates are pull together, the part of volume of water is pushed out from space between the plates.  g – the plates are returned in an initial point, rest water is pushed out.

1,2,3,4 - technological cycle  steps. In the first step there is a water inhausting in the space between the plates. In second the velocity of a motion of the plates is increased sharply, between the plates there is bubble cavitation. In the third step velocity of the plates reduce, there is a collapse of bubble cavities and – the shock on the plates, the plates in addition keep away from each other - a working stroke. In the fourth step the waste water is pushed out from the space between the plates, its temperature is downgraded. Then the cycle is iterated.

Expedient instance. Frequency of full operation period of the plates of 1 Hz. The advancing of the forward end of the plates in relation to the back occurs without overlapping of phases of their motion and without disruptures between phases. So, the plates are revealed in front and at once the opening is began behind. The plates are analogously closed in front and at once begins concealment behind. The continuance of magnification of velocity of opening in the end of the inhausting corresponds to the frequency of 103 Hz with the amplitude 10 - 3 m. As a result between the plates originate bubble cavities. The cavities, collapsing, translate water thermal energy in energy of the tensioned chains of molecules of water. This energy then is realized in the energy of mechanical shock on a surface of the plates. The plates in addition are moved (the working stroke).

Thus, universality of the Unified Theory has allowed to develop an expedient of reception of energy also, which gives variety of the useful practical applications. It is the possibility of transfer the sea and river crafts on the drives, using thermal energy of water of the rivers, the seas and oceans. The possibility to create the refrigerating technics, which not dependent on high temperature of a surrounding medium and is not heating up a surrounding medium. To downgrade temperature of the explosive motors with fluid-flow cooling at high temperature of ambient air, for example, by their operation in Africa. To raise efficiency of the specified type of drives, by their operation in normal temperature requirements. At mass use of the expedient in technics it is possible to influence essentially ambient the temperature, including to change local temperature of Ocean towards its depression. 

 

 

Зарегистрируйтесь чтобы оставлять комментарии!
You must register to post comments!

Chapters:


Гравитация - не притяжение. Кумачев Владимир Иванович © 2014-2018. Все Права Защищены.