Prevention of the catastrophes

Aircraft "Drill" in Space

The Space aircraft "Drill" is in the form of a dual plate. It is most suitable for individual using at near outer-space flights: on Moon, to Mars. It is caused by its small sizes as its major sizes lead to rather considerable difficulties of making of a magnetic field in a medial band of the gravekettle. On requirements of guidance of Gravity here the magnetic field should be dense enough also, that will demand rather a high power of the magnetic oscillator.

The magnetic field in the aircraft "Drill" can be created by the strong constant magnet also, for example the magnet, created in Florida. But use of this installation on the gravekettle "Drill" is impeded, as the cooling in this installation the bulky. Nevertheless, this installation can be developed, using «heat-mechanical shock in a fluid» (look «Generator energy Ray» and «Prevents explosions of atomic power stations»). The new installation becomes compact, possessing rather high speed and efficiency. At an exit of the gravekettle in Space the chilling system is disconnected. At approach of gravekettle to an aerosphere of a target planet it is switched on again.

For life on gravecettle take air reserve. It is better for air in the gravekettle to erect capacity in the form of the hollow ring torus. This torus dispose according to the shape of gravekettle on its periphery.

The gravitational generator of energy. The long-term flight of the kettle in Space will demand energy for flight control and ability to live of crew and passengers. For this purpose the most comprehensible is energy reception directly from environmental Space. The Unified Theory has allowed to develop the gravitational generator of energy.

The gravitational generator represents the vane wheel rotor. Half of the wheel is closed by the antigravitational shield (Gravekettle "Umbrella" see). On the second half of the wheel the stream of an ether, affluenting in the gravekettle, is guided. This function carries out the  ether duct.

The  ether duct represents the pipe, executed on the basis of magnetic, not having poles, the cylinder (look «Aircraft Cylinder»). On the basis of an operation principle of the gravekettle "Umbrella" is carried out also the ether lens, which squeezes the ether stream.

Construction of the ether lens represents the following. Featured in the head «Prevention of catastrofes» the antigravitational umbrella will turn over, as in aircraft "Tornado". In the middle of the umbrella the hole is executed, and above on umbrella periphery in contact to it is erected the vertical ether notpervious cylinder - the blind. The blind is made on the basis of the same principle, as the notpervious shield in the gravekettle "Umbrella". From above of the hole for prevention of formation of the converging spiral vortex the ether blind works. The ether is squeezed at fluxion in the blind to the hole in the umbrella. The squeezing is caused by elasticity of ether. Further the squeezed stream gets in the ether duct (see above).

The electric generator is erected on one axis with the vane wheel rotor of the gravitational generator. According to essence of Gravity, the shovels of the wheel do heavy for great effect of the generator.  For the peak effect the wheel exchange by the flywheel - a gyroscope. At major turns of the wheel its suspension bracket do by soft. 

Зарегистрируйтесь чтобы оставлять комментарии!
You must register to post comments!

Chapters:


Гравитация - не притяжение. Кумачев Владимир Иванович © 2014-2018. Все Права Защищены.